shale shaker screen Archives - Shale Shaker,Shale shaker for sale,Dryer Shaker,Drying Shaker,Shale shaker manufacturers

September 18, 2017July 21, 2020

Double Deck Drilling Fluids Shale Shaker

Do you know the Double Deck Drilling Fluids Shale Shaker ? Now Let’s talk the avantages and disadvantage of it.

Advantages of Double Deck Drilling Fluids Shale Shaker:

For the same API size and the same area bottom shale shaker screen,double deck shale shaker can treat a bigger capacity. The wide-meshed shaker screen on top deck can separate most big size solids before the mud enter into the bottom deck. It greatly reduce the load of bottom shale shaker screen.
For the same API size and the same screen area shaker screen,double deck shale shaker can separate the drilling mud or drilling cuttings more dryer. As there are 2 times shale shaker separation.

Disadvantages of Double Deck Drilling Fluids Shale Shaker:

The double deck shale shaker have advantages of bigger advantage and dryer separation result, but it has some difficult to change shale shaker screen. And the cost of replacement shaker screen also higher, as there are 5 each shaker screen for a shale shaker.

Shale shaker for solids control are devices that remove drill cuttings from the drilling fluid while circulating and drilling. There are many different designs and research into the best design is constantly ongoing since solids control is vital in keeping down costs associated with the drilling fluid. The basic design consists of large, flat sheets of wire mesh screens or sieves of various mesh sizes that shakes or vibrates the drill cuttings, commonly shale shaker, across and off of the screens as the drilling fluid flows through them and back into the drilling fluids processing system, often called a mud system. This separates the drill cuttings, often called solids, from the drilling fluid so that it can be recirculated back down the well bore.

In oilfield industry, linear motion shale shaker are widely used for drilling mud solids control of oil gas well drilling for rig.

Kosun- China Solids Control Leader&Drilling Waste MangementExpert

July 11, 2017November 2, 2017

Drying Shaker for Sale Cover all over the World

drying shaker for sale

A spring-stacked plunger and reversible pawl give a tightening activity amid development of the working handle. An entire 180 degrees of development is conceivable in both bearings.

Contingent upon pawl setting, moving the handle in one course turns the jack screw to raise or lower the screen outline, while in the other bearing the jack screw stays stationary amid handle development. The spring-stacked pawl allows the administrator to change the bearing to either raise or lower the shale shaker screen outline, as required.

The point of the release end of the shaker screen edge is endlessly movable inside the hardware’s accessible range.

There, certainly, are some precautions to be taken while operating a drying Shaker :
1.Assess release channel association on side of container for breaks. Fix association as well as add silicone sealant to avert spillage.
2.Review cover on unused container release association for breaks. Fix association as well as add silicone sealant to avert spillage.
3.Utilizing a water hose, wash off gathered process material from screen outline, inside of container and AWD point alteration parts.
4.Abundance prepare material in these regions may hinder edge alteration of screen edge and can lessen screen outline vibration if the edge bottoms out on the development.
5.Check for and evacuate any aggregation of process material or other hindrance in feeder inside. Feeder blockage may bring about over the top sprinkling and uneven dissemination of slurry onto the screen bed.

Examine whole machine for proof of covering harm, including uncovered base metal, consumption, profound scratches, or different voids. Repair harmed zones as per covering makers’ particulars.

To make sure the operation of the shale shaker and normal usage life on screen, the operator need to make sure parts like wedges, screw cap bolt and springs on the shale shakers are installed correctly with no signs of wrongdoing. The operator installs the screens according the operation manual provide it from the seller.

May 3, 2017November 2, 2017

Shale Shaker for Sale by Kosun all over the World

Shale Shaker for Sale

Shale Shakers are the integral tools to separate solid from the drill rigs. The drilling fluid moves into the Shale Shakers directly where it is processed once it returns to the surface of the well. Once processed, the mud tanks are filled with the drilling fluid where further other finer solids are removed using other equipments.
Shale Shakers are the primary and integral tools to separate solid from the drill rigs. . They serve as the purification channels for the drill rigs. They remove solids by processing them finely.

This device is simple in concept, but it is complicated to use efficiently. The solids smaller than the wire mesh pass through the screen. In addition, the larger solids are removed. The whole process can be technically difficult but if followed systematically, it can become an easy task. It consists of five major parts, namely, hopper, feeder, screen basket, basket angling mechanism and vibrator. The shale shaker screen panel consists of Screen mesh, binding agent, building agent and 3D Technology.
In order to maintain a long-lasting life of Shale Shaker, you will need to make sure the parts like wedges, screw cap bolt, and springs on the shale shaker are installed correctly with no signs of fault.
The working efficiency of a Shale Shaker can be improved using minor details.
There are varied causes for premature screen failure, mainly,
1- When personnel use high pressure to clean the equipment, it can adversely affect it.
2- One should be extremely cautious and careful during the installation as improper handling could have a damaging effect upon the machine
3- The deck rubbers used by personnel should always be clean and properly installed.
4- Sometimes, mud weight can also inversely affect the working mechanism.
5- One should be always careful while loading solids, heavier ones can damage the machine
6- Installation should be precise and perfect for a good efficiency.
7- Screen Panels should be carefully handled during the storage.
8- If the screens are not cleaned properly or contain a manufacturing defect, it can ruin the machine.
If right equipments are used at the right places in the device, it could lead to higher efficiency and long lasting life of Shale Shaker.

Kosun shale shaker for sale all over the world and is well recognied by clients because of its high quality and best after sale service.

April 20, 2017November 2, 2017

Shale Shaker, Shale Shaker Screen and Shale Shaker Screen Manufacturers

Shale Shaker

Shale Shaker and Shale Shaker Screen provided by Shale Shaker Screen Manufacturers by kosun .

Shale Shaker, all these industries could face trouble and huge expenditure incurred in procuring the oil and gases through the tedious and time-consuming processes. The very first step of drilling begins with a Shale Shaker. The machines operated to separate the solids from the liquid.

Shale Shakers are highly effective, environment friendly, cost effective, and error-free. However, they need only specialized personnel and professionals to work properly. They directly influence and affect the outcome of industries’ profits and losses. It becomes essential to keep them clean for better functioning.

Shale shaker screen

Shale shaker screen sizes and shape are based on shale shaker manufacturing and model.Rectangular heavy-duty vibrating screens are mainly used for heavy-duty solid cuttings collected in oilfield drilling.

The fluids, which are otherwise disposed and considered of no use at all, are wonderful lubricants and cooling agents for the Shale Shaker. The only negative aspect of the fluids is chemicals mixed inside them that would be present in water and oil based solutions irrespective of their unique qualities.
It is a boon for industries of 21st century.

Shale Shaker Screen Manufacturers

Shale Shaker Screens manufacturer-Kosun have offered clients all over the world as the Kosun shale shaker screen, Derrick Shaker Screens, Mi SWACO Shaker Screens and Brandt Shaker Screens replacement….

Shale shaker, shale shaker screen and shale shaker screen manufacturers with more than 20 years experience.

Kosun will integrate the global resources, set foot on the Chinese market, provide all-round and one-stop oil drilling fluid solid control products and waste treatment products, solutions and a high degree of responsibility and sustainable innovation in the spirit of the service, to maximize the staff, And shareholders, and customer satisfaction for the pursuit of Kosun people.

KOSUN will wholeheartedly serve the customers at home and abroad with abundant technological strength and perfect after-sales service system. KOSUN is looking forward to negotiation and cooperation with you!

April 17, 2017July 21, 2020

Shale Shaker Definition Meaning from Kosun

Shale Shaker

Shale Shaker is the most important device for the drilling industries as it magically removes all impurities and solid waste from the liquids required for business. This device is simple in concept, but it is comparatively difficult to use efficiently. The smaller particles can easily be removed from the machine’s screen but larger particles require time and patience.

Earlier, It was evident that only a single Shale Shaker could effectively be used for the entire business but now owing to higher modern efficiency, drills can have as many as four shakers. The upper strata of drilling speed and cutting can handle extreme pressure. However, shale shaker screen should be regularly scrutinized for failure to operate. Timely detection of any flaws and replacement would ensure a long life of the Shale Shaker.

There are two keys to successfully operate the device;
1- Disassembly of the Vibrator
2- Re-assembling of the Shale Shakers
•   The whole process can be technically difficult but if followed systematically, it can become an easy task. Firstly, disconnect the power to electric motor and switch of the open position. After that, you will need to drive pulley and remove the motor. Thereafter, you will need to remove the counterweight from both the ends of vibrator shafts.
•   Begin loosening the support bolts of and V-Belts under the motor. Remove the counterweight using screws and later remove the collars, cartridge caps and retainers
•   The retaining ring should be removed only from the drive side, strike on one end of the shaft using a hammer or a block of wood, it should become easier after completing this process
•   If it continues to give trouble, the cartridge should be immersed from inside by striking the shaft again using the other end.
•   Check the bolts for fastening of the vibrator. The bolts should be tightened to 210 ft lbs.

March 29, 2017

Shale Shaker, Desander Close Relation

Shale Shaker

Shale shaker form the first stage barrier through which the drilling fluid or the mud passes. It is basically shale meaning clay, mud or silt, that has some specific structure which has been untouched since its deposition in ground; which is here separated. . The waste is processed first in the shale shaker before transferring it to the other equipment.

It is used to separate solids with diameter above 75µm. Different components of shale shaker are hopper, feeder, screen basket, vibrator and basket angling mechanism and vibrator. They are believed to be most vital in solid control system as their performance direct has impact on the successive equipment and also relates to the quality of processed fluids.

Desander is a devices along with desilter form pair of hydrocyclones that differentiate sand and silt from the drilling fluid in borehole or downhole. Desander is added below the mud taker following by shale shaker and degasser.

A desander is typically positioned next-to-last in the arrangement of solids control equipment, with a desander centrifuge as the subsequent processing unit. A drilling mud is added in its direction with an angle which is roughly at 90 degrees to it.

As the drilling mud is moved downwards in this cone shaped equipment solid particles are segregated from liquids ones by centrifugal force acting on these. This separated solid particles are allowed to continue move downward until is discarded from the hydrocyclones.

Desander are set to eliminate abrasive solids found in the drilling mud, which surpass the processing of H-I G Dryer Shaker. Desanders usually separate soild with diameter 45~74μm, and 15~44μm.

Different size of desanders and desilter are available which function similarly. They determine the size of particles the device removes from the mud system. Alike shale shaker desanders have no moving parts.

Kosun also provide balanced elliptical motion shaker , Drilling Fluids Dryer Shaker, Shale Shaker Screen , Drying Shaker ……

Kosun with more than 20 years experience in this aspect, welcome to contact us if you need.

March 20, 2017

Shale Shaker of High Efficiency from Kosun Manufacturer

Shale Shaker

Shale shaker is the first grade of solids control equipment in drilling purification system.

Shale shaker is mainly used in geographical engineering for mining of coal or other diesel products.

Increase shaker screening area- As per screening practices, decrease drilling mud amount in unit shaker screen is favorable to improve screening effect. When filled upto 80% to its capacity it performs as much as it could.

So make sure that the shaker screen is big enough to conduct screening drilling mud which always think 2:1 rate for the length to width of the screen is the best design. Thus improving shaker screen will facilitate better working of it.

Size of shaker screens matters too! When a bigger size shaker screen is used in shale shaker it not only increases the vibration strength and amplitude but also improves the hitting force and shearing force reacted by shale shaker screen to drilling mud and decreasing adhesive force between solid particles. Meanwhile, this measure is good at avoiding block of the screen to some extent, realizing drilling mud shearing and separation.

Basket angling mechanism-proper angling control the drilling mud flowing speed. Generally, big angle is faster than that of small angle. Although this practice is with big volume of shale shaker, it really does low efficiency. So, according to experience, it’s fine to keep cutting fluids speed <0.6m/S and 15 degrees for the screen.

Adding many layers screens to shale shaker- different particles are resent with different sizes thus to eliminate these multi-layer screen it can be used. Setting several layers of screen with bigger mesh form low to upper screens help to improve the shaking screen efficiency.

Proper cleansing and maintenance of it- If cleaned by brushes or sticks it can lead to damage of the screen. It is must to use proper cleansing solutions . Never use water with an oil or synthetic based mud. For maintenance of the shaker ensure the shaker components are in good order; rubber supports, tensioning mounts etc.

March 10, 2017March 13, 2017

Shale Shaker – Functions of Solids Control Equipment

Shale Shaker for Sale

Shale shaker is the key component in solids control equipment used in drilling industry. Drilling operations use a borehole technology to penetrate deep beneath the surface to reach the fossil fuel, in this pursuit the mud-loggers first need to do a sampling to ascertain the depth and quality of rock they are penetrating. In oil field digging, let’s suppose in an off-shore site, this drilling will be done with the help of drilling rig.

As the drilling bit will cut through the rock underneath ocean floor, it will need some lubricant to keep it going, a drilling fluid is used for that purpose. A drilling fluid is a rich mixture of different chemicals, either oil based or water based, this is commonly known as “drilling mud”. This drilling mud is very expensive to create, and it doesn’t only keep the equipment lubricated but also help in keeping it cool and clean for further operations.

The drilling bit will carry with itself drilling cuttings, essentially the rock shavings, mixed with drilling mud. The mud-loggers will extract these shavings from the drilling bit for their further analysis. As explained earlier in the article, the drilling fluid is quite expensive so it is imperative for the operators to restore the drilling fluid from the drilling waste. For this purpose various solid control equipments are used, among them a shale shaker is the foremost.

A shale shaker with the help of shaker screen helps in separating the drilling cuttings from drilling fluid, and the separated drilling fluid is channeled to a separate container for further processing and treatment. The dried solid, i.e. drilling cuttings are conveyed to a separate container for further treatment and disposal.

One very important factor in the solid control system is its contribution for environmental balance. If a solid control system is not efficient enough, it is likely that the drill cuttings will still carry some amount of drilling fluid that contains chemicals which could be really harmful for the environment and cause contamination of soil or ground water. The drilling industry follows strict rules on drilling waste handling for the sake of environmental impact.

In conclusion, shale shaker’s main function is to filter the drilling waste with the help of an effective shaker screen and as a result help in economy of overall drilling operations and environmental prevention.