<h2> Drying Shaker </h2>
Drying Shaker is integral part of the drilling industry without which things would have been extremely different. If a drying shaker is under control and its work efficiency is not dependent on other factors or influenced by minor faults, it can largely affect the productivity of other equipments directly related to it.
1- In order to maintain a long-lasting life of Shale Shaker , you will need to make sure the parts like wedges, screw cap bolt, and springs on the shale shaker are installed correctly with no signs of fault.
2- Ensure the rubber parts of the Shale Shaker are installed properly and fully intact without any flaw or error. The screen of Shale Shaker is mostly rear and tear and will need constant replacement after normal usage. If wear down speed is faster than normal, check all the moving parts for proper functioning and security of screen properly.
3- Lubrication and constant maintenance of the device would help maintain life- long life of Shale Shaker.
4- If the drilling fluids flow out of the pore or damaged place, cuttings cannot be removed.
5- Any damaged screen should be repaired immediately.
6- Inspect cover on unused hopper discharge connection for leaks. Tighten connection and add silicone sealant to prevent leakage.
7- Tighten connection and add silicon sealant to provide any leakage into the device.
8- Check regularly for any accumulation of processed materials or any other obstruction in the interior.
9- Feeder blockage may be the cause of excessive splashing and uneven distribution onto the screen bed.
10- Wash off accumulated materials from the screen frame, interior of hopper and AWD angle adjustment components.
11- Check the operating environment of vibration isolation element and the stand parts of the screen, if damage or excessive fatigue should be removed immediately.
12- For those screens that have not been treated with pre tension, must do the 1h, 3h, and 8h screen tension test after installation.