Shale Shaker Screen Archives - Shale Shaker,Shale shaker for sale,Dryer Shaker,Drying Shaker,Shale shaker manufacturers

May 5, 2019May 5, 2019

Kosun KDS-500 Shield Slurry Treatment System

Since the introduction of slurry balance shield, the slurry separation and treatment system and equipment have appeared.During the construction of slurry shield, slurry treatment is one of the important factors affecting the normal tunneling of the shield, and directly affects the construction schedule, construction cost and environmental protection.The application of slurry shield, along with the tunnel construction, is gradually developed from the city edge to the city center.Due to the limitation of the construction site, the mud water treatment equipment must cover a small area and have a high treatment rate, so an efficient and integrated slurry treatment equipment has become the first choice of the owner and the construction unit.

Xi’an Kosun Environmental Engineering co.,LTD,It is a professional company providing integrated solutions of solid waste treatment in the field of energy conservation and environmental protection, focusing on the development and service of complete sets of technologies and equipment such as sludge reduction and resource utilization.

Kosun Environmental Engineering co., ltd. helps customers with sludge reduction and disposal services, including: general contracting of sludge treatment, sludge treatment mobile site services, sludge treatment package solutions.

Kosun KDS-500 shield slurry treatment system is a modular design system.The system is designed for mud purification in medium sized slurry balance shield construction projects.The KDS-500 system is composed of a coarse vibrating screen module and two sets of sand removal modules. The coarse vibrating screen module is equipped with a coarse screen for removing large particles, and the sand removal module is equipped with a desander hydrocyclone and a fine vibrating screen.

The slurry falls into the collecting box through the coarse vibrating screen, and then is separated and transported to two sets of sand removal modules through two connecting pipes. The sand removal module is equipped with a desander hydrocyclone, which can remove the sand in the slurry.After two levels of treatment, the effect of repeated circulation can be achieved.

November 2, 2017November 8, 2017

KOSUN Shaker Screens Sold to Iran used in FLC2000 shale shaker

As we all know, Shaker screen is the largest consumable wearing device for solids control equipment.A Cost-effective shaker screen can not only ensure the screening quality of drilling mud, but also can extend the trial life of shale shaker. Shale shaker screens consume a portion cost of drilling, so a cost-effective shaker screen is needed by many drilling contractors.

KOSUN developed a high-quality shaker screen through years of research and trial. Recently, KOSUN has produced a number of screens for the FLC2000 shale shaker. It has been tested by third parties and fully compliance with international standards. 610 Pieces of KOSUN Shaker Screens are ready to delivery to Iran.

KOSUN has been the leading China OEM supplier of quality, high performance screening surfaces for over 20 years. Our entry into manufacturing screens for kinds of shakers has come at the request of numerous operators who desire to improve the performance of their shakers by taking advantage of Kosun’s screen manufacturing technology. KOSUN now has screens available for kinds of internationally renowned shale shakers.

Features and Benefits of KOSUN Shaker Screen:

-Available for Derrick, Brandt, Swaco and KEM-TRON brand shakers.

-API RP 13C compliant

-Long life stainless steel screen cloth

-Triple screen layers

-Bonded to perforated panel

-Quick and easy to repair

-Consistently manufactured, rugged construction

-Mature technology, competitive price

-Ability to handle high flow rates

-Cut point integrity

-Longer screen life

-Minimize nearsize particle blinding

KOSUN is a large-scale enterprise specializing in the production of solids control equipment and solid-liquid separation equipment. After decades of rapid development, KOSUN has developed into a well-known solids control equipment manufacturer at home and abroad. (Editor:Kosun Lily.Wang)

Kosun- China Solids Control Leader&Drilling Waste Management Expert

Tel.: +86 29 87304914

Email: sales2@adkosun.com

Contact person: Lily Wang

Online consulting:

http://www.kosun.com

http://www.kosuneco.com

September 18, 2017July 21, 2020

Double Deck Drilling Fluids Shale Shaker

Do you know the Double Deck Drilling Fluids Shale Shaker ? Now Let’s talk the avantages and disadvantage of it.

Advantages of Double Deck Drilling Fluids Shale Shaker:

For the same API size and the same area bottom shale shaker screen,double deck shale shaker can treat a bigger capacity. The wide-meshed shaker screen on top deck can separate most big size solids before the mud enter into the bottom deck. It greatly reduce the load of bottom shale shaker screen.
For the same API size and the same screen area shaker screen,double deck shale shaker can separate the drilling mud or drilling cuttings more dryer. As there are 2 times shale shaker separation.

Disadvantages of Double Deck Drilling Fluids Shale Shaker:

The double deck shale shaker have advantages of bigger advantage and dryer separation result, but it has some difficult to change shale shaker screen. And the cost of replacement shaker screen also higher, as there are 5 each shaker screen for a shale shaker.

Shale shaker for solids control are devices that remove drill cuttings from the drilling fluid while circulating and drilling. There are many different designs and research into the best design is constantly ongoing since solids control is vital in keeping down costs associated with the drilling fluid. The basic design consists of large, flat sheets of wire mesh screens or sieves of various mesh sizes that shakes or vibrates the drill cuttings, commonly shale shaker, across and off of the screens as the drilling fluid flows through them and back into the drilling fluids processing system, often called a mud system. This separates the drill cuttings, often called solids, from the drilling fluid so that it can be recirculated back down the well bore.

In oilfield industry, linear motion shale shaker are widely used for drilling mud solids control of oil gas well drilling for rig.

Kosun- China Solids Control Leader&Drilling Waste MangementExpert

July 11, 2017November 2, 2017

Drying Shaker for Sale Cover all over the World

drying shaker for sale

A spring-stacked plunger and reversible pawl give a tightening activity amid development of the working handle. An entire 180 degrees of development is conceivable in both bearings.

Contingent upon pawl setting, moving the handle in one course turns the jack screw to raise or lower the screen outline, while in the other bearing the jack screw stays stationary amid handle development. The spring-stacked pawl allows the administrator to change the bearing to either raise or lower the shale shaker screen outline, as required.

The point of the release end of the shaker screen edge is endlessly movable inside the hardware’s accessible range.

There, certainly, are some precautions to be taken while operating a drying Shaker :
1.Assess release channel association on side of container for breaks. Fix association as well as add silicone sealant to avert spillage.
2.Review cover on unused container release association for breaks. Fix association as well as add silicone sealant to avert spillage.
3.Utilizing a water hose, wash off gathered process material from screen outline, inside of container and AWD point alteration parts.
4.Abundance prepare material in these regions may hinder edge alteration of screen edge and can lessen screen outline vibration if the edge bottoms out on the development.
5.Check for and evacuate any aggregation of process material or other hindrance in feeder inside. Feeder blockage may bring about over the top sprinkling and uneven dissemination of slurry onto the screen bed.

Examine whole machine for proof of covering harm, including uncovered base metal, consumption, profound scratches, or different voids. Repair harmed zones as per covering makers’ particulars.

To make sure the operation of the shale shaker and normal usage life on screen, the operator need to make sure parts like wedges, screw cap bolt and springs on the shale shakers are installed correctly with no signs of wrongdoing. The operator installs the screens according the operation manual provide it from the seller.

June 8, 2017June 8, 2017

Shale Shaker Screen Good Cleaning System from Kosun Manufacturer

Shale Shaker Screen

Shale shaker screen mainly classified into soft sieve screen, sieve plate type screen,and frame plate type screen .

Any machinery will give its best performance if maintained properly, so a preventive measure is a prerequisite if an operator wants to ensure the long life of the machinery.

While routine services will take place as part of your preventive maintenance, there is something that operators themselves will be able to take care of and be rewarded with even better results. A simple way is to keep the machinery clean.

In solid control equipment, shaker screen performs that key job of eliminating the solids through the screen. So it is imperative that they are prone to damage if not kept properly clean and that will naturally increase the overall project cost.
Here are some ways to keep the shaker screen clean and safe:
•   If the shaker has been idle for some time, it is important that the shaker screen be cleaned before the use. To clean the shaker screen , the best way is to use water gun or water hose.
•   Usage of wire brush will actually damage the mesh, so stay clear of brushes in your cleaning process.
•   The shaker screen constantly sieves the waste material and likely to get clogged with waste material and as a result the screen holes will be blinded and hamper the process if filtration. To clean the blinded screen holes, use the water hose from back side. You could consider removing the larger particles manually, but never with a brush or stick, as the mesh of the screen is prone to be torn in the process if you use any of these.
•   Make sure that the screens are not left with the drilling waste i.e. drill cuttings and mud to be dried while in the screen. This will invariably lead to a pre-mature failure of the equipment.
•   Never allow any worn out rubbers to be used in the equipment, this directly lowers the performance of the equipment and damages the shale shaker screen.
•   Do not allow any other material to be placed over the shaker screens , either in function or in storage.
With these basic cleaning procedures, you could ensure a longer life for the shaker screen.

April 20, 2017November 2, 2017

Shale Shaker, Shale Shaker Screen and Shale Shaker Screen Manufacturers

Shale Shaker

Shale Shaker and Shale Shaker Screen provided by Shale Shaker Screen Manufacturers by kosun .

Shale Shaker, all these industries could face trouble and huge expenditure incurred in procuring the oil and gases through the tedious and time-consuming processes. The very first step of drilling begins with a Shale Shaker. The machines operated to separate the solids from the liquid.

Shale Shakers are highly effective, environment friendly, cost effective, and error-free. However, they need only specialized personnel and professionals to work properly. They directly influence and affect the outcome of industries’ profits and losses. It becomes essential to keep them clean for better functioning.

Shale shaker screen

Shale shaker screen sizes and shape are based on shale shaker manufacturing and model.Rectangular heavy-duty vibrating screens are mainly used for heavy-duty solid cuttings collected in oilfield drilling.

The fluids, which are otherwise disposed and considered of no use at all, are wonderful lubricants and cooling agents for the Shale Shaker. The only negative aspect of the fluids is chemicals mixed inside them that would be present in water and oil based solutions irrespective of their unique qualities.
It is a boon for industries of 21st century.

Shale Shaker Screen Manufacturers

Shale Shaker Screens manufacturer-Kosun have offered clients all over the world as the Kosun shale shaker screen, Derrick Shaker Screens, Mi SWACO Shaker Screens and Brandt Shaker Screens replacement….

Shale shaker, shale shaker screen and shale shaker screen manufacturers with more than 20 years experience.

Kosun will integrate the global resources, set foot on the Chinese market, provide all-round and one-stop oil drilling fluid solid control products and waste treatment products, solutions and a high degree of responsibility and sustainable innovation in the spirit of the service, to maximize the staff, And shareholders, and customer satisfaction for the pursuit of Kosun people.

KOSUN will wholeheartedly serve the customers at home and abroad with abundant technological strength and perfect after-sales service system. KOSUN is looking forward to negotiation and cooperation with you!