Posted on

Drying Shaker for Sale Cover all over the World

drying shaker for sale

A spring-stacked plunger and reversible pawl give a tightening activity amid development of the working handle. An entire 180 degrees of development is conceivable in both bearings.

Contingent upon pawl setting, moving the handle in one course turns the jack screw to raise or lower the screen outline, while in the other bearing the jack screw stays stationary amid handle development. The spring-stacked pawl allows the administrator to change the bearing to either raise or lower the shale shaker screen outline, as required.

The point of the release end of the shaker screen edge is endlessly movable inside the hardware’s accessible range.

drying shaker for sale
drying shaker for sale

There, certainly, are some precautions to be taken while operating a drying Shaker :
1.Assess release channel association on side of container for breaks. Fix association as well as add silicone sealant to avert spillage.
2.Review cover on unused container release association for breaks. Fix association as well as add silicone sealant to avert spillage.
3.Utilizing a water hose, wash off gathered process material from screen outline, inside of container and AWD point alteration parts.
4.Abundance prepare material in these regions may hinder edge alteration of screen edge and can lessen screen outline vibration if the edge bottoms out on the development.
5.Check for and evacuate any aggregation of process material or other hindrance in feeder inside. Feeder blockage may bring about over the top sprinkling and uneven dissemination of slurry onto the screen bed.

Examine whole machine for proof of covering harm, including uncovered base metal, consumption, profound scratches, or different voids. Repair harmed zones as per covering makers’ particulars.

To make sure the operation of the shale shaker and normal usage life on screen, the operator need to make sure parts like wedges, screw cap bolt and springs on the shale shakers are installed correctly with no signs of wrongdoing. The operator installs the screens according the operation manual provide it from the seller.

Posted on

Drying Shaker for Sale 5 Percent Off by Kosun

Drying Shaker for Sale

Drying shaker for sale by Kosun has attracted clients at home and abroad, and the drying shaker for sale this time mainly used in geographical engineering for mining of coal or other diesel products.

As per screening practices, decrease drilling mud amount in unit, the shaker screensof drying shaker for sale  is favorable to improve screening effect. When filled upto 80% to its capacity shale shaker performs as much as it could. So make sure that the shaker screen is big enough to conduct screening drilling mud which always think 2:1 rate for the length to width of the screen is the best design. Thus improving shaker screen will facilitate better working of shale shaker.

drying shaker for sale
drying shaker for sale

Size of shaker screens matters too! When a bigger size shaker screen is used in shale shaker it not only increases the vibration strength and amplitude but also improves the hitting force and shearing force reacted by shale screen to drilling mud and decreasing adhesive force between solid particles. Meanwhile, this measure is good at avoiding block of the screen to some extent, realizing drilling mud shearing and separation.

Basket angling mechanism-proper angling control the drilling mud flowing speed. Generally, big angle is faster than that of small angle. Although this practice is with big volume of shale shaker, it really does low efficiency. So, according to experience, it’s fine to keep cutting fluids speed <0.6m/S and 15 degrees for the screen.

Adding many layers screens to shale shaker- different particles are resent with different sizes thus to eliminate these multi-layer screen shale shaker can be used.  Setting several layers of screen with bigger mesh form low to upper screens help to improve the shaking screen efficiency.

Proper cleansing and maintenance ways of the drying shaker for sale is important.  If cleaned by brushes or sticks it can lead to damage of the screen. It is must to use proper cleansing solutions . Never use water with an oil or synthetic based mud. For maintenance of the shaker ensure the shaker components are in good order; rubber supports, tensioning mounts etc.

Posted on

Inspection and Maintenance of Drilling Fluid Shale Shaker

Drilling Fluid Shale Shaker for Sale

Whether professional or not, every shale shaker user must put its integrity and standards first. A machine’s integrity is enhanced by ensuring that equipment is obtained from a certified dealer, manufactured by an accredited company, authenticated and meets the API standards and regulations.

What is quality if you purchase the wrong equipment? Remember that there are different models and types of shale shakers designed for specific needs. Now that you have purchased the shale shaker most suitable for your needs, keep in mind that this equipment is fragile and requires vigilance in its maintenance.

shale shaker
shale shaker

For enhanced efficiency and durability monitor and maintain your machine by
•    Storing the equipment in their boxes or according to manufacturer’s instructions.
•    Inspecting the machine to ensure it is properly mounted with the bolts properly oriented, the tension right and the screens properly aligned to the frame.
•    Inspecting all parts for tears and rips or wear and tear.
•    Replacing all worn parts bolts and deck and crown rubbers immediately for continued efficiency.
•    Do not walk on screens or allow staff to step on them. They can be damaged.
•    Avoid dropping tools on the screens.
•    Wash the screens thoroughly at the end of work every day to clean off mud and sticky substances.
•    Inspect the shaker screens at reasonable intervals for tears and holes. This will curb against letting mud accumulate and begin to weigh heavy against the equipment leaving it prone to heavy build-up of solids returned from the active mud tank.New
•    Inspecting and controlling mud weight will enhance screen life.

Poor handling of machines could reduce their life span and leading to machine failure. Inspection and maintenance of the drilling fluid shale shaker is a must for every end user of the shale shaker. It entails proper operation, installation, storage, monitoring and maintenance of the equipment.

Kosun have decanter centrifuge , shaker screen , vertical cutting dryer  , drilling waste management equioment system……

Welcome to contact us if you need.