Drying Shaker is one of the solid control equipment in drilling waste purification system and Kosun with more than 20 years experience in this aspects.
Drying shaker of maintenance is straightforward, while there are a considerable measure of basic disappointments additionally, we have to comprehend the normal deficiencies of boring liquid shaker and how to manage. The following are some common problems faced concerning the drying shaker:
The vibration engine pivot turn out to be gradually, and there is a heading warming:
This demonstrates the typical upkeep of the shale shaker was not done well, and the bearing is shy of greasing up oil, if the oil is recently included the reason will be oil quality issues or get too full, second rate oil make the bearing square so oil quality is very essential.
The poor screening nature of penetrating drying shaker:
This issues may for the most part brought on by the mis operation, it might be the shaker screen work blockage, fine grain size and increment of water substance in the strainer material, the sifter material layer is too thick, sustaining imbalance, etc. May both sides of the screen is not tight, in the event that it is an offbeat shaft vibration may the belt is too free, a time of invert revolution can be taken after the mechanical preparing is finished keeping in mind the end goal to enhance the nature of screening.
Shaft break of shale shaker box:
In the event that the screen box has been because of absence of inflexibility, flat level did not recognize, will bring about the shaft crack, on the off chance that it still in operation will likewise make the material stream peculiarities. There likewise might be uncalled for operation, that is the imbalanced sustaining is additionally one reason.
The shale shaker can’t begin or plentiful is too little:
Ought to check whether the aggregation of oil on the electrical machine is excessively, if so we ought to expel stores on the vibrating screen.
Drying Shaker for Sale by Manufacturer Kosun serving clients at home and abroad and been praised good in performance.
Hi-g drying shaker is used to recover the slurry from the cuttings to reduce the liquid / oil content in the cuttings to as low as about 10% (w / w) and recover some of the drilling mud so that the drilling costs can be reduced, The amount of drilling waste water can be reduced to reduce environmental pollution.Hi-G dryer shaker for WBM and OBM.
Hi-g drying shaker is segments of penetrating gear utilized as a part of numerous ventures, for example, coal cleaning, mining, oil and gas boring.
They are the principal period of a solids control framework on a penetrating apparatus, and are utilized to expel extensive solids (cuttings) from the boring liquid.
Boring liquids are basic to the boring procedure and, among different capacities, serve to grease up and cool the boring tool and also pass on the bored cuttings far from the drag opening. These liquids are a blend of different chemicals in a water or oil based arrangement and can be extremely costly to make.
Hi-g drying shaker are considered, by the greater part of the penetrating business, to be the most critical gadget in the strong control framework as the execution of the progressive gear specifically identifies with the cleanliness of the treated boring liquid.
Mudloggers for the most part go out and check the shakers for shake tests that have circled from base. They isolate the stone from the penetrating liquid and take it into an on location lab where they dry out the examples and name them as per profundity.
They then take a gander at the examples and break down what sort of shake they have at a specific profundity. This aides figures out what profundity that sort of shake was experienced.
Hi-g drying shaker is the essential solids division device on an apparatus. In the wake of coming back to the surface of the well the utilized penetrating liquid streams specifically to the shale shakers where it starts to be handled.
Once prepared by the shale shakers the penetrating liquid is saved into the mud tanks where other strong control hardware start to expel the better solids from it. The solids expelled by the shale shaker are released out of the release port into a different holding tank where they anticipate advance treatment or transfer.
Hi-G Shaker is an integral tool to separate drilling waste from the drill rigs. They are used in industries like oil and gas, coal cleaning and mining. It is impossible to function in a drilling industry without making ample use of Hi-G shaker. They serve as the purification channels for the drill rigs. They remove solids by processing them finely.
The structure of the Hi-G shaker consists of five equipments mainly,
It is also known as “underflow” and “base.” It is an important tool for the Shale Shaker and works as a large vessel or pot for collecting the fluids that have been processed. It should be ordered depending upon the requirements of the mud system. The larger quantities of mud would require a Hopper of a different depth.
A Feeder is a collection pan for the drilling fluids before they are processed. Some feeders are equipped with a specialized technique that helps the drilling fluid move through the shaker without any obstruction or hindrance and move inside the hopper and back into the mid system prior to purification. The most commonly used feeder is called a weir feeder.
3- Screen Basket
It is an impeccable and extra-ordinary part of the machine as it shakes and moves with perfect ease while the other parts of the machine carry forward the cleaning process. It aids in better functioning of the Hi-g drying shaker. It must simplify the working and further maintenance of the machine.
4- Basket Angling Mechanism
The shaker basket must be fully equipped and designed as per the flow of the drilling fluids. It is accommodating enough to change the angle as per the flow of liquids. The flow could be divided into two categories, namely, Pool and Beach.
This is a specialized motor used for applying vibrating force and motion to the shaker bed. It also used a set of eccentric weights to provide and unidirectional force.
We manufacture Drilling Solids Control Equipment and Drilling Waste Management Equipment for more than 20 years experience with API, IADC, ISO and CE certificated.
Shale shaker is the key component in solids control equipment used in drilling industry. Drilling operations use a borehole technology to penetrate deep beneath the surface to reach the fossil fuel, in this pursuit the mud-loggers first need to do a sampling to ascertain the depth and quality of rock they are penetrating. In oil field digging, let’s suppose in an off-shore site, this drilling will be done with the help of drilling rig.
As the drilling bit will cut through the rock underneath ocean floor, it will need some lubricant to keep it going, a drilling fluid is used for that purpose. A drilling fluid is a rich mixture of different chemicals, either oil based or water based, this is commonly known as “drilling mud”. This drilling mud is very expensive to create, and it doesn’t only keep the equipment lubricated but also help in keeping it cool and clean for further operations.
The drilling bit will carry with itself drilling cuttings, essentially the rock shavings, mixed with drilling mud. The mud-loggers will extract these shavings from the drilling bit for their further analysis. As explained earlier in the article, the drilling fluid is quite expensive so it is imperative for the operators to restore the drilling fluid from the drilling waste. For this purpose various solid control equipments are used, among them a shale shaker is the foremost.
A shale shaker with the help of shaker screen helps in separating the drilling cuttings from drilling fluid, and the separated drilling fluid is channeled to a separate container for further processing and treatment. The dried solid, i.e. drilling cuttings are conveyed to a separate container for further treatment and disposal.
One very important factor in the solid control system is its contribution for environmental balance. If a solid control system is not efficient enough, it is likely that the drill cuttings will still carry some amount of drilling fluid that contains chemicals which could be really harmful for the environment and cause contamination of soil or ground water. The drilling industry follows strict rules on drilling waste handling for the sake of environmental impact.
In conclusion, shale shaker’s main function is to filter the drilling waste with the help of an effective shaker screen and as a result help in economy of overall drilling operations and environmental prevention.