shale shaker screen sizes Archives - Shale Shaker,Shale shaker for sale,Dryer Shaker,Drying Shaker,Shale shaker manufacturers

July 11, 2017November 2, 2017

Drying Shaker for Sale Cover all over the World

drying shaker for sale

A spring-stacked plunger and reversible pawl give a tightening activity amid development of the working handle. An entire 180 degrees of development is conceivable in both bearings.

Contingent upon pawl setting, moving the handle in one course turns the jack screw to raise or lower the screen outline, while in the other bearing the jack screw stays stationary amid handle development. The spring-stacked pawl allows the administrator to change the bearing to either raise or lower the shale shaker screen outline, as required.

The point of the release end of the shaker screen edge is endlessly movable inside the hardware’s accessible range.

There, certainly, are some precautions to be taken while operating a drying Shaker :
1.Assess release channel association on side of container for breaks. Fix association as well as add silicone sealant to avert spillage.
2.Review cover on unused container release association for breaks. Fix association as well as add silicone sealant to avert spillage.
3.Utilizing a water hose, wash off gathered process material from screen outline, inside of container and AWD point alteration parts.
4.Abundance prepare material in these regions may hinder edge alteration of screen edge and can lessen screen outline vibration if the edge bottoms out on the development.
5.Check for and evacuate any aggregation of process material or other hindrance in feeder inside. Feeder blockage may bring about over the top sprinkling and uneven dissemination of slurry onto the screen bed.

Examine whole machine for proof of covering harm, including uncovered base metal, consumption, profound scratches, or different voids. Repair harmed zones as per covering makers’ particulars.

To make sure the operation of the shale shaker and normal usage life on screen, the operator need to make sure parts like wedges, screw cap bolt and springs on the shale shakers are installed correctly with no signs of wrongdoing. The operator installs the screens according the operation manual provide it from the seller.

June 13, 2017November 2, 2017

Shaker Shaker Screen – Cleaning System from Kosun

Shale Shaker Screen

Shale shaker screen is mainly classified into soft sieve screen, sieve plate type screen,and frame plate type screen .

Any machinery will give its best performance if maintained properly, so a preventive measure is a prerequisite if an operator wants to ensure the long life of the machinery.

While routine services will take place as part of your preventive maintenance, there is something that operators themselves will be able to take care of and be rewarded with even better results. A simple way is to keep the machinery clean.

In solid control equipment, shaker screen performs that key job of eliminating the solids through the screen. So it is imperative that they are prone to damage if not kept properly clean and that will naturally increase the overall project cost.

Here are some ways to keep the shaker screen clean and safe:
• If the shaker has been idle for some time, it is important that the shaker screen be cleaned before the use. To clean the shaker screen, the best way is to use water gun or water hose.
• Usage of wire brush will actually damage the mesh, so stay clear of brushes in your cleaning process.
• The shale shaker screen constantly sieves the waste material and likely to get clogged with waste material and as a result the screen holes will be blinded and hamper the process if filtration. To clean the blinded screen holes, use the water hose from back side. You could consider removing the larger particles manually, but never with a brush or stick, as the mesh of the screen is prone to be torn in the process if you use any of these.
• Make sure that the screens are not left with the drilling waste i.e. drill cuttings and mud to be dried while in the screen. This will invariably lead to a pre-mature failure of the equipment.
• Never allow any worn out rubbers to be used in the equipment, this directly lowers the performance of the equipment and damages the shaker screen.
• Do not allow any other material to be placed over the shaker screens , either in function or in storage.

With these basic cleaning procedures, you could ensure a longer life for the shaker screen.

April 20, 2017November 2, 2017

Shale Shaker, Shale Shaker Screen and Shale Shaker Screen Manufacturers

Shale Shaker

Shale Shaker and Shale Shaker Screen provided by Shale Shaker Screen Manufacturers by kosun .

Shale Shaker, all these industries could face trouble and huge expenditure incurred in procuring the oil and gases through the tedious and time-consuming processes. The very first step of drilling begins with a Shale Shaker. The machines operated to separate the solids from the liquid.

Shale Shakers are highly effective, environment friendly, cost effective, and error-free. However, they need only specialized personnel and professionals to work properly. They directly influence and affect the outcome of industries’ profits and losses. It becomes essential to keep them clean for better functioning.

Shale shaker screen

Shale shaker screen sizes and shape are based on shale shaker manufacturing and model.Rectangular heavy-duty vibrating screens are mainly used for heavy-duty solid cuttings collected in oilfield drilling.

The fluids, which are otherwise disposed and considered of no use at all, are wonderful lubricants and cooling agents for the Shale Shaker. The only negative aspect of the fluids is chemicals mixed inside them that would be present in water and oil based solutions irrespective of their unique qualities.
It is a boon for industries of 21st century.

Shale Shaker Screen Manufacturers

Shale Shaker Screens manufacturer-Kosun have offered clients all over the world as the Kosun shale shaker screen, Derrick Shaker Screens, Mi SWACO Shaker Screens and Brandt Shaker Screens replacement….

Shale shaker, shale shaker screen and shale shaker screen manufacturers with more than 20 years experience.

Kosun will integrate the global resources, set foot on the Chinese market, provide all-round and one-stop oil drilling fluid solid control products and waste treatment products, solutions and a high degree of responsibility and sustainable innovation in the spirit of the service, to maximize the staff, And shareholders, and customer satisfaction for the pursuit of Kosun people.

KOSUN will wholeheartedly serve the customers at home and abroad with abundant technological strength and perfect after-sales service system. KOSUN is looking forward to negotiation and cooperation with you!