Drying Shaker for Sale 5 Percent Off by Kosun

Drying Shaker for Sale

Drying shaker for sale by Kosun has attracted clients at home and abroad, and the drying shaker for sale this time mainly used in geographical engineering for mining of coal or other diesel products.

As per screening practices, decrease drilling mud amount in unit, the shaker screensof drying shaker for sale  is favorable to improve screening effect. When filled upto 80% to its capacity shale shaker performs as much as it could. So make sure that the shaker screen is big enough to conduct screening drilling mud which always think 2:1 rate for the length to width of the screen is the best design. Thus improving shaker screen will facilitate better working of shale shaker.

drying shaker for sale
drying shaker for sale

Size of shaker screens matters too! When a bigger size shaker screen is used in shale shaker it not only increases the vibration strength and amplitude but also improves the hitting force and shearing force reacted by shale screen to drilling mud and decreasing adhesive force between solid particles. Meanwhile, this measure is good at avoiding block of the screen to some extent, realizing drilling mud shearing and separation.

Basket angling mechanism-proper angling control the drilling mud flowing speed. Generally, big angle is faster than that of small angle. Although this practice is with big volume of shale shaker, it really does low efficiency. So, according to experience, it’s fine to keep cutting fluids speed <0.6m/S and 15 degrees for the screen.

Adding many layers screens to shale shaker- different particles are resent with different sizes thus to eliminate these multi-layer screen shale shaker can be used.  Setting several layers of screen with bigger mesh form low to upper screens help to improve the shaking screen efficiency.

Proper cleansing and maintenance ways of the drying shaker for sale is important.  If cleaned by brushes or sticks it can lead to damage of the screen. It is must to use proper cleansing solutions . Never use water with an oil or synthetic based mud. For maintenance of the shaker ensure the shaker components are in good order; rubber supports, tensioning mounts etc.

Shale Shaker for Sale by Kosun all over the World

Shale Shaker for Sale

Shale Shakers are the integral tools to separate solid from the drill rigs. The drilling fluid moves into the Shale Shakers directly where it is processed once it returns to the surface of the well. Once processed, the mud tanks are filled with the drilling fluid where further other finer solids are removed using other equipments.
Shale Shakers are the primary and integral tools to separate solid from the drill rigs. . They serve as the purification channels for the drill rigs. They remove solids by processing them finely.

shale shaker for sale
shale shaker for Sale

This device is simple in concept, but it is complicated to use efficiently. The solids smaller than the wire mesh pass through the screen. In addition, the larger solids are removed. The whole process can be technically difficult but if followed systematically, it can become an easy task. It consists of five major parts, namely, hopper, feeder, screen basket, basket angling mechanism and vibrator. The shale shaker screen panel consists of Screen mesh, binding agent, building agent and 3D Technology.
In order to maintain a long-lasting life of Shale Shaker, you will need to make sure the parts like wedges, screw cap bolt, and springs on the shale shaker are installed correctly with no signs of fault.
The working efficiency of a Shale Shaker can be improved using minor details.
There are varied causes for premature screen failure, mainly,
1- When personnel use high pressure to clean the equipment, it can adversely affect it.
2- One should be extremely cautious and careful during the installation as improper handling could have a damaging effect upon the machine
3- The deck rubbers used by personnel should always be clean and properly installed.
4- Sometimes, mud weight can also inversely affect the working mechanism.
5- One should be always careful while loading solids, heavier ones can damage the machine
6- Installation should be precise and perfect for a good efficiency.
7- Screen Panels should be carefully handled during the storage.
8- If the screens are not cleaned properly or contain a manufacturing defect, it can ruin the machine.
If right equipments are used at the right places in the device, it could lead to higher efficiency and long lasting life of Shale Shaker.

Kosun shale shaker for sale all over the world and is well recognied by clients because of its high quality and best after sale service.

Shale Shaker – Functions of Solids Control Equipment

Shale Shaker for Sale

Shale shaker is the key component in solids control equipment used in drilling industry. Drilling operations use a borehole technology to penetrate deep beneath the surface to reach the fossil fuel, in this pursuit the mud-loggers first need to do a sampling to ascertain the depth and quality of rock they are penetrating. In oil field digging, let’s suppose in an off-shore site, this drilling will be done with the help of drilling rig.

As the drilling bit will cut through the rock underneath ocean floor, it will need some lubricant to keep it going, a drilling fluid is used for that purpose. A drilling fluid is a rich mixture of different chemicals, either oil based or water based, this is commonly known as “drilling mud”. This drilling mud is very expensive to create, and it doesn’t only keep the equipment lubricated but also help in keeping it cool and clean for further operations.

shale shaker
shale shaker

The drilling bit will carry with itself drilling cuttings, essentially the rock shavings, mixed with drilling mud. The mud-loggers will extract these shavings from the drilling bit for their further analysis. As explained earlier in the article, the drilling fluid is quite expensive so it is imperative for the operators to restore the drilling fluid from the drilling waste. For this purpose various solid control equipments are used, among them a shale shaker is the foremost.

A shale shaker with the help of shaker screen helps in separating the drilling cuttings from drilling fluid, and the separated drilling fluid is channeled to a separate container for further processing and treatment. The dried solid, i.e. drilling cuttings are conveyed to a separate container for further treatment and disposal.

One very important factor in the solid control system is its contribution for environmental balance. If a solid control system is not efficient enough, it is likely that the drill cuttings will still carry some amount of drilling fluid that contains chemicals which could be really harmful for the environment and cause contamination of soil or ground water. The drilling industry follows strict rules on drilling waste handling for the sake of environmental impact.

In conclusion, shale shaker’s main function is to filter the drilling waste with the help of an effective shaker screen and as a result help in economy of overall drilling operations and environmental prevention.