Posted on

Drying Shaker for Sale Cover all over the World

drying shaker for sale

A spring-stacked plunger and reversible pawl give a tightening activity amid development of the working handle. An entire 180 degrees of development is conceivable in both bearings.

Contingent upon pawl setting, moving the handle in one course turns the jack screw to raise or lower the screen outline, while in the other bearing the jack screw stays stationary amid handle development. The spring-stacked pawl allows the administrator to change the bearing to either raise or lower the shale shaker screen outline, as required.

The point of the release end of the shaker screen edge is endlessly movable inside the hardware’s accessible range.

drying shaker for sale
drying shaker for sale

There, certainly, are some precautions to be taken while operating a drying Shaker :
1.Assess release channel association on side of container for breaks. Fix association as well as add silicone sealant to avert spillage.
2.Review cover on unused container release association for breaks. Fix association as well as add silicone sealant to avert spillage.
3.Utilizing a water hose, wash off gathered process material from screen outline, inside of container and AWD point alteration parts.
4.Abundance prepare material in these regions may hinder edge alteration of screen edge and can lessen screen outline vibration if the edge bottoms out on the development.
5.Check for and evacuate any aggregation of process material or other hindrance in feeder inside. Feeder blockage may bring about over the top sprinkling and uneven dissemination of slurry onto the screen bed.

Examine whole machine for proof of covering harm, including uncovered base metal, consumption, profound scratches, or different voids. Repair harmed zones as per covering makers’ particulars.

To make sure the operation of the shale shaker and normal usage life on screen, the operator need to make sure parts like wedges, screw cap bolt and springs on the shale shakers are installed correctly with no signs of wrongdoing. The operator installs the screens according the operation manual provide it from the seller.

Posted on

Hi-g Drying Shaker Good Performance from Kosun

Hi-g drying shaker

Hi-g drying shaker  is used to recover the slurry from the cuttings to reduce the liquid / oil content in the cuttings to as low as about 10% (w / w) and recover some of the drilling mud so that the drilling costs can be reduced , The amount of drilling waste water can be reduced to reduce environmental pollution. Hi-G dryer shaker  for WBM and OBM.

Hi-g drying shaker is segments of penetrating gear utilized as a part of numerous ventures, for example, coal cleaning, mining, oil and gas boring.

They are the principal period of a solids control framework on a penetrating apparatus, and are utilized to expel extensive solids (cuttings) from the boring liquid.

Hi-G Drying shaker
Hi-G Dryingshaker

Boring liquids are basic to the boring procedure and, among different capacities, serve to grease up and cool the boring tool and also pass on the bored cuttings far from the drag opening. These liquids are a blend of different chemicals in a water or oil based arrangement and can be extremely costly to make.

Hi-g drying shaker are considered, by the greater part of the penetrating business, to be the most critical gadget in the strong control framework as the execution of the progressive gear specifically identifies with the cleanliness of the treated boring liquid.

Mudloggers for the most part go out and check the shakers for shake tests that have circled from base. They isolate the stone from the penetrating liquid and take it into an on location lab where they dry out the examples and name them as per profundity.

They then take a gander at the examples and break down what sort of shake they have at a specific profundity. This aides figures out what profundity that sort of shake was experienced.

Hi-g drying shaker is the essential solids division device on an apparatus. In the wake of coming back to the surface of the well the utilized penetrating liquid streams specifically to the shale shakers where it starts to be handled.

Once prepared by the shale shakers the penetrating liquid is saved into the mud tanks where other strong control hardware start to expel the better solids from it. The solids expelled by the shale shaker are released out of the release port into a different holding tank where they anticipate advance treatment or transfer.

Posted on

H-I G Dryer Shaker And Mud Cleaner System Close Relation

H-I G Dryer Shaker

H-I G Dryer Shaker is segments of penetrating gear utilized as a part of numerous ventures, for example, coal cleaning, mining, oil and gas boring. They are the principal period of a solids control framework on a penetrating apparatus, and are utilized to expel extensive solids (cuttings) from the boring liquid.

H-I G Dryer Shaker is considered, by the greater part of the penetrating business, to be the most critical gadget in the strong control framework as the execution of the progressive gear specifically identifies with the cleanliness of the treated boring liquid.

H-I G Dryer Shaker
H-I G Dryer Shaker

On the other side, A desander is generally organized by rearward over the traverse of action of solids control furnish, with a desander rotate as the subsequent dealing with unit. Desanders are gone before by gas busters, gumbo launch gear (if used), H-I G Dryer Shaker , mud cleaner (if used) and a vacuum degasser. Desanders are broadly utilized as a bit of oilfield penetrating. Hone has demonstrated that hydrocyclone desanders are budgetary and persuading gear.

On the inverse side, H-I G Dryer Shaker is sections of penetrating contraption utilized as a bit of different attempts, for example, coal cleaning, mining, oil and gas debilitating. They are the essential time of a solids control framework on an invading mechanical get together, and are utilized to evacuate expansive solids (cuttings) from the debilitating liquid.

Shale shaker are considered, by the majority of the entering business, to be the most fundamental contraption in the strong control structure as the execution of the dynamic mechanical assembly especially identifies with the cleanliness of the treated depleting liquid.

We produce drilling solid control equipment and drilling waste management equipment, with more than 20 years of experience in API, IADC, ISO and CE certification.
The full range of solid control equipment includes settling centrifuges, shale oscillators, mud washers, stainless steel degassers, pumps, mud tank systems. 

We also have OEM services, and when your production line is too tight, we can make you at a more cost-effective level based on your criteria. Not only to provide equipment,KOSUN also manufactures and manufactures spare parts drilling units related to the range of oil and gas to replace your current equipment.

 

Posted on

Shale Shaker – Functions of Solids Control Equipment

Shale Shaker for Sale

Shale shaker is the key component in solids control equipment used in drilling industry. Drilling operations use a borehole technology to penetrate deep beneath the surface to reach the fossil fuel, in this pursuit the mud-loggers first need to do a sampling to ascertain the depth and quality of rock they are penetrating. In oil field digging, let’s suppose in an off-shore site, this drilling will be done with the help of drilling rig.

As the drilling bit will cut through the rock underneath ocean floor, it will need some lubricant to keep it going, a drilling fluid is used for that purpose. A drilling fluid is a rich mixture of different chemicals, either oil based or water based, this is commonly known as “drilling mud”. This drilling mud is very expensive to create, and it doesn’t only keep the equipment lubricated but also help in keeping it cool and clean for further operations.

shale shaker
shale shaker

The drilling bit will carry with itself drilling cuttings, essentially the rock shavings, mixed with drilling mud. The mud-loggers will extract these shavings from the drilling bit for their further analysis. As explained earlier in the article, the drilling fluid is quite expensive so it is imperative for the operators to restore the drilling fluid from the drilling waste. For this purpose various solid control equipments are used, among them a shale shaker is the foremost.

A shale shaker with the help of shaker screen helps in separating the drilling cuttings from drilling fluid, and the separated drilling fluid is channeled to a separate container for further processing and treatment. The dried solid, i.e. drilling cuttings are conveyed to a separate container for further treatment and disposal.

One very important factor in the solid control system is its contribution for environmental balance. If a solid control system is not efficient enough, it is likely that the drill cuttings will still carry some amount of drilling fluid that contains chemicals which could be really harmful for the environment and cause contamination of soil or ground water. The drilling industry follows strict rules on drilling waste handling for the sake of environmental impact.

In conclusion, shale shaker’s main function is to filter the drilling waste with the help of an effective shaker screen and as a result help in economy of overall drilling operations and environmental prevention.

Posted on

Hi-G Shaker of Kosun Solid Control for Sale all Over the World

Hi-G  Shaker

Hi-G  Shaker  is a strong stage control (strong control) the principal obstruction, otherwise called a strong control hardware, penetrating is not permitted without screened specifically into the mud tank.

Hi-G shaker is the subject of very much oversaw group. The upper strata, generally sand, Drying Shaker simple to plug the sifter sand, mud filtering impact, ought to wash the brush, wash flush, deplete strainer.

The upper strata of the penetrating pace, bore cuttings and all the more substantial removal, shale shakers handle the weight enormous, shale shaker screen effectively harmed, ought to consistently check, know about.

Particularly around evening time, under the diminish light, a little administrator, how to guarantee that the penetrating great shaker screen , screen harm after convenient discovery and opportune substitution,

Hi-G Shaker
Hi-G Shaker

Hi-G  Shaker circumstance is not a similar group in the upper piece of the well boring mud gap area cannot be totally screened, HI-G shaker required boring liquid recouped from the pool, Decanter Centrifuge to make reusing readiness ahead of time, for example, the boring liquid strong control the pool deplete, outline pump pull pipelines.

Before Desander is recouping to completely settle in penetrating mud pool, the best one of Desilter was recuperated before boring machine is cleaned, Mud Agitator don’t recuperate with sand to mud pump tank, dodge coordinate sand into the well.

In the wake of boring through vibrating sifter, and afterward additionally handled by penetrating more cleanly. Boring mud cleaner evacuate better particles, as well as the penetrating liquid into the well before the last boundary. After the shale shaker screen is harmed, mud cleaners expel extensive particles of sand increment, to mirror the boring liquid from the screen surface cleaner.

As the leader in China’s solids control and drilling waste management industry, KOSUN has been highly praised by local customers by virtue of its high-quality products and excellent services. KOSUN will supply better goods and services to customers continually.