Factors that cause mud run out of Drilling Fluid Shale Shaker

Drilling Fluid Shale Shaker are often used in the drilling process, and everyone has discovered that the Shale Shaker sometimes shows the phenomenon of mud running. Then, why does the Shale Shaker show the phenomenon of running mud? From the following three factors:

1. Drilling fluid (mud):

-the mud stickiness is too high;

-the mud proportion is too large;

-the solid content is too large;

-Scattered drill cuttings.

2. Elements of shale shaker performance:

-the exciting force is small;

-the mesh number of the screen is too high;

– the effective area of the screen is small;

-the choice of vibration trajectory determines the speed of mud movement;

-if the screen is selected, the mud will be unevenly distributed on the screen surface and tend to both sides.

3. The essentials for the operation and maintenance of the drilling fluid shake shaker:

-the elevation angle of the screen box is adjusted too small;

-the direction of rotation of the vibration motor is wrong;

-the amount of slurry supply is too large and exceeds the disposal amount of the shale shaker;

-the mesh of the sieve is obstructed, so it should be washed regularly with clean water during use;

-failure to rinse the screen with clean water in time during the shutdown caused the mud to dry out;

-when the mud performance changes, the percentage of the eccentric block of the vibration motor is not adjusted accordingly.

KOSUN- China Solids Control Leader&Drilling Waste Management Expert
Email: sales2@adkosun.com
WhatsApp/Wechat:+86 18792396268
Contact person: Lily Wang
Online consulting:
http://www.kosun.com
http://www.kosuneco.com

The important role of drilling fluid shale shaker in solids control equipment

The drilling fluid shale shaker is the primary processing equipment in the solids control system. It is used to separate the relatively large drilling cuttings in the mud and plays an important role in maintaining the performance of the drilling fluid. In order to ensure the production of high-quality drilling fluid shale shaker with high mud screening accuracy, low energy consumption and no dust pollution, every quality control in the production process is strictly controlled.

Outstanding performance of drilling fluid shale shaker in solids control equipment:

1. Choose a screen with large screening area, large processing capacity and good processing effect;

2. The whole screen box is heat treated, and the surface has a heavy-duty anti-corrosion coating to ensure the long service life of the shale shaker;

3. The electrical control cabinet with thermal relay overload and phase loss protection is adopted to ensure the safety of operators;

4. Adopt full-bonded ditch-edge rigid screens, which are fixed by the plate type, which makes the replacement of the screens more convenient and quick, and can replace a variety of shale shaker screens;

5. Reasonably design the height of the cofferdam of the vibrating screen logging tank to buffer and even flow the mud, reduce the direct impact on the screen, and effectively extend the service life of the screen;

6. It adopts the Italian joint venture vibration motor, which has the advantages of high vibration intensity, large screening area, adjustable screen box angle, low noise, excellent performance and high efficiency.

KOSUN- China Solids Control Leader&Drilling Waste Management Expert
Email: sales2@adkosun.com
WhatsApp/Wechat:+86 18792396268
Contact person: Lily Wang
Online consulting:
http://www.kosun.com
http://www.kosuneco.com

Drilling Fluid Shale Shaker Outstanding Performance in Solids Control Equipment

The outstanding performance of the drilling fluid Shale Shaker in the solids control equipment is far more than these. You must operate correctly according to the instructions so that its performance can be fully utilized.

Drilling Fluid Shale Shaker
Drilling Fluid Shale Shaker

1. Choose a screen with a large screening area, large processing capacity and good processing effect;

2. The whole screen box is heat treated with heavy anti-corrosion coating on the surface to ensure the long service life of the Shale Shaker;

3. The electrical control cabinet with thermal relay overload and phase loss protection is adopted to ensure the safety of operators;

4. Adopt full-bonded ditch-edge rigid screens, which are fixed by the plate type, which makes the screen replacement more convenient and quick, and can replace a variety of Shale Shaker;

5. Reasonably design the height of the cofferdam of the Shale Shaker mud logging tank to buffer and even flow the mud, reduce the direct impact on the screen, and effectively extend the service life of the screen;

6. It adopts the Italian joint venture Ouli vibration motor, which has the advantages of high vibration intensity, large screening area, adjustable screen box angle, low noise, excellent performance and high efficiency.

KOSUN draws on the advanced design experience and manufacturing technology of Drilling Fluid Shale Shaker at home and abroad to optimize the design structure of the Shale Shaker to produce a Shale Shaker that can quickly remove harmful solids in the mud and ensure efficient recovery of drilling fluid. The drilling fluid Shale Shaker is the primary processing equipment in the solids control system. It is used to separate relatively large drilling cuttings in the mud and plays an important role in maintaining the performance of the drilling fluid. In order to ensure the production of high-quality drilling fluid Shale Shaker with high mud screening accuracy, low energy consumption and no dust pollution, every quality control in the production process is strictly controlled.

KOSUN- China Solids Control Leader&Drilling Waste Management Expert
Email: sales2@adkosun.com
Wechat:+86 18792396268
Contact person: Lily Wang
Online consulting:
http://www.kosun.com
http://www.kosuneco.com

Inspection and Maintenance of Drying Shaker

Drying Shaker

Drying Shaker is one of the solid control equipment in drilling waste purification system and Kosun with more than 20 years experience in this aspects.

Drying shaker of maintenance is straightforward, while there are a considerable measure of basic disappointments additionally, we have to comprehend the normal deficiencies of boring liquid shaker and how to manage. The following are some common problems faced concerning the drying  shaker:

The vibration engine pivot turn out to be gradually, and there is a heading warming:
This demonstrates the typical upkeep of the shale shaker was not done well, and the bearing is shy of greasing up oil, if the oil is recently included the reason will be oil quality issues or get too full, second rate oil make the bearing square so oil quality is very essential.

drying shaker
drying shaker

The poor screening nature of penetrating drying shaker:
This issues may for the most part brought on by the mis operation, it might be the  shaker screen work blockage, fine grain size and increment of water substance in the strainer material, the sifter material layer is too thick, sustaining imbalance, etc. May both sides of the screen is not tight, in the event that it is an offbeat shaft vibration may the belt is too free, a time of invert revolution can be taken after the mechanical preparing is finished keeping in mind the end goal to enhance the nature of screening.

Shaft break of shale  shaker box:
In the event that the screen box has been because of absence of inflexibility, flat level did not recognize, will bring about the shaft crack, on the off chance that it still in operation will likewise make the material stream peculiarities. There likewise might be uncalled for operation, that is the imbalanced sustaining is additionally one reason.

The shale shaker can’t begin or plentiful is too little:
Ought to check whether the aggregation of oil on the electrical machine is excessively, if so we ought to expel stores on the vibrating screen.

Drying Shaker for Sale  by Manufacturer Kosun serving clients at home and abroad and been praised good in performance.