Inspection and Maintenance of Drying Shaker

Drying Shaker

Drying Shaker is one of the solid control equipment in drilling waste purification system and Kosun with more than 20 years experience in this aspects.

Drying shaker of maintenance is straightforward, while there are a considerable measure of basic disappointments additionally, we have to comprehend the normal deficiencies of boring liquid shaker and how to manage. The following are some common problems faced concerning the drying  shaker:

The vibration engine pivot turn out to be gradually, and there is a heading warming:
This demonstrates the typical upkeep of the shale shaker was not done well, and the bearing is shy of greasing up oil, if the oil is recently included the reason will be oil quality issues or get too full, second rate oil make the bearing square so oil quality is very essential.

drying shaker
drying shaker

The poor screening nature of penetrating drying shaker:
This issues may for the most part brought on by the mis operation, it might be the  shaker screen work blockage, fine grain size and increment of water substance in the strainer material, the sifter material layer is too thick, sustaining imbalance, etc. May both sides of the screen is not tight, in the event that it is an offbeat shaft vibration may the belt is too free, a time of invert revolution can be taken after the mechanical preparing is finished keeping in mind the end goal to enhance the nature of screening.

Shaft break of shale  shaker box:
In the event that the screen box has been because of absence of inflexibility, flat level did not recognize, will bring about the shaft crack, on the off chance that it still in operation will likewise make the material stream peculiarities. There likewise might be uncalled for operation, that is the imbalanced sustaining is additionally one reason.

The shale shaker can’t begin or plentiful is too little:
Ought to check whether the aggregation of oil on the electrical machine is excessively, if so we ought to expel stores on the vibrating screen.

Drying Shaker for Sale  by Manufacturer Kosun serving clients at home and abroad and been praised good in performance.

What Are Functions of The Drilling Fluids Dryer Shaker?

Dryer Shaker

Drilling fluids are used while drilling holes on the surface of the earth for oil, natural gas and even for water wells. The different types of drilling fluids that are used are water, water based muds (mixture of water and clay or other chemicals), oil or synthetic oil.

The advantages of using drilling fluids are;
– Due to the continuous use of machines for long time, the machine get heated. These fluids helps in keeping the drilling machine cool.
– As there is continuous contact between the drill pipes and the walls of the holes, heat may be generated due to friction. Drilling fluids, especially oil based fluids provides lubrication to the drill pipes.
– Keeps the machine clean.
– Maintains pressure on formation fluids (naturally occurring fluids).

Dryer Shaker
Dryer Shaker

This drilling fluids are poured inside the hole with different flow rate and pressure. These fluids then collect the cuttings of rocks from the hole and are then forced out of the hole by a pump. This mixture is then passed through a shale shaker.

A shale shaker is an equipment that removes large solids that are mixed with the drilling fluids, drilling waste , so that the fluids can be reused. These shale shakers not only improve the efficiency but also is very important from the cost cutting point of view. The basic parts of a shale shaker are the base of the shaker called Hopper, a feeder where the mixture of fluid and solid is collected, a screen and a vibrator.

Drilling fluids dryer shaker  is a vibrating equipment that uses a Shaker Screen (a mesh like structure supported on a frame) to separate the mixture. The vibratory motion may either be linear, elliptical or circular. The efficiency of a shale shaker also depends upon the vibration speed and the amplitude and frequency of the shale shakers .

The main functions of  drilling fluids dryer shaker is to make the drilling fluids reusable by separating the solids that are mixed with it.

Drilling Fluids Dryer Shaker Function

Drilling Fluids Dryer Shaker

Drilling fluids dryer shaker is the use of special two vibration motor to do the excitation source, so that the material on the screen surface, while straight forward. Through the sieve screen is relatively low, through the continuous nozzle to skip the completion of the classification of materials, is widely used in the drilling industry.

All drilling operations require drilling fluids in some form. The main function of a shale shaker is to separate the drilling solid from a circulatory system. A shale shaker is essentially an equipment to filter the drilling waste obtained during the drilling operation.

Drilling Fluids Dryer Shaker
Drilling Fluids Dryer Shaker

As the foremost part of solid control system, the efficiency of a shale shaker determines the performance of rest of the equipments. The more cuttings they remove from the circulation, the active system will receive more fluid. To achieve this however, the solids captured in the shaker screen needs to be constantly conveyed as to make room for more solid waste for filtering process. The drilling fluid will pass through the screen and be caught in a mud tank.

This filtering through the shaker screen is done with the help of vibration force that allows the fluid to pass through the screen mesh more efficiently and leaves the solids to be discharged further.

While a number of factors will determine the performance and quality of screening process, including the external factors such as temperature and viscosity of the drilling waste, the size of the cuttings, etc.

The linear motion shale shaker is a widely popular type of shale shaker since its introduction in early 1980s. And with latest developments in shaker screen design the process filtering the drilling fluid from drilling waste and removing the drilling solids has become far more feasible than it was originally there in earlier models of shale shakers .

The main function of the drilling fluids dryer shaker is to increase the flow of drilling fluid through shaker screen into the mud tank and discharge the drilling cuttings or drilling solid for further disposal. By eliminating the drilling fluids in dried out condition they are easier to be disposed as per environmental requirement and leave a less harmful impact on environment if there is less quantity of harmful chemicals in form of drilling fluid is present on them before disposal.

Shale Shaker, Desander Close Relation

Shale Shaker

Shale shaker form the first stage barrier through which the drilling fluid or the mud passes. It is basically shale meaning clay, mud or silt, that has some specific structure which has been untouched since its deposition in ground; which is here separated. . The waste is processed first in the shale shaker before transferring it to the other equipment.

It is used to separate solids with diameter above 75µm. Different components of shale shaker are hopper, feeder, screen basket, vibrator and basket angling mechanism and vibrator. They are believed to be most vital in solid control system as their performance direct has impact on the successive equipment and also relates to the quality of processed fluids.

shale shaker
shale shaker

Desander is a devices along with desilter form pair of hydrocyclones that differentiate sand and silt from the drilling fluid in borehole or downhole. Desander is added below the mud taker following by shale shaker and degasser.

A desander is typically positioned next-to-last in the arrangement of solids control equipment, with a desander centrifuge as the subsequent processing unit.  A drilling mud is added in its direction with an angle which is roughly at 90 degrees to it.

As the drilling mud is moved downwards in this cone shaped equipment solid particles are segregated from liquids ones by centrifugal force acting on these. This separated solid particles are allowed to continue move downward until is discarded from the hydrocyclones.

Desander are set to eliminate abrasive solids found in the drilling mud, which surpass the processing of H-I G Dryer Shaker. Desanders usually separate soild with diameter 45~74μm, and 15~44μm.

Different size of desanders and desilter are available which function similarly. They determine the size of particles the device removes from the mud system. Alike shale shaker desanders have no moving parts.

Kosun also provide  balanced elliptical motion shaker , Drilling Fluids Dryer Shaker, Shale Shaker ScreenDrying Shaker ……

Kosun with more than 20 years experience in this aspect, welcome to contact us if you need.

Shale Shaker – Functions of Solids Control Equipment

Shale Shaker for Sale

Shale shaker is the key component in solids control equipment used in drilling industry. Drilling operations use a borehole technology to penetrate deep beneath the surface to reach the fossil fuel, in this pursuit the mud-loggers first need to do a sampling to ascertain the depth and quality of rock they are penetrating. In oil field digging, let’s suppose in an off-shore site, this drilling will be done with the help of drilling rig.

As the drilling bit will cut through the rock underneath ocean floor, it will need some lubricant to keep it going, a drilling fluid is used for that purpose. A drilling fluid is a rich mixture of different chemicals, either oil based or water based, this is commonly known as “drilling mud”. This drilling mud is very expensive to create, and it doesn’t only keep the equipment lubricated but also help in keeping it cool and clean for further operations.

shale shaker
shale shaker

The drilling bit will carry with itself drilling cuttings, essentially the rock shavings, mixed with drilling mud. The mud-loggers will extract these shavings from the drilling bit for their further analysis. As explained earlier in the article, the drilling fluid is quite expensive so it is imperative for the operators to restore the drilling fluid from the drilling waste. For this purpose various solid control equipments are used, among them a shale shaker is the foremost.

A shale shaker with the help of shaker screen helps in separating the drilling cuttings from drilling fluid, and the separated drilling fluid is channeled to a separate container for further processing and treatment. The dried solid, i.e. drilling cuttings are conveyed to a separate container for further treatment and disposal.

One very important factor in the solid control system is its contribution for environmental balance. If a solid control system is not efficient enough, it is likely that the drill cuttings will still carry some amount of drilling fluid that contains chemicals which could be really harmful for the environment and cause contamination of soil or ground water. The drilling industry follows strict rules on drilling waste handling for the sake of environmental impact.

In conclusion, shale shaker’s main function is to filter the drilling waste with the help of an effective shaker screen and as a result help in economy of overall drilling operations and environmental prevention.

Inspection and Maintenance of Drilling Fluid Shale Shaker

Drilling Fluid Shale Shaker for Sale

Whether professional or not, every shale shaker user must put its integrity and standards first. A machine’s integrity is enhanced by ensuring that equipment is obtained from a certified dealer, manufactured by an accredited company, authenticated and meets the API standards and regulations.

What is quality if you purchase the wrong equipment? Remember that there are different models and types of shale shakers designed for specific needs. Now that you have purchased the shale shaker most suitable for your needs, keep in mind that this equipment is fragile and requires vigilance in its maintenance.

shale shaker
shale shaker

For enhanced efficiency and durability monitor and maintain your machine by
•    Storing the equipment in their boxes or according to manufacturer’s instructions.
•    Inspecting the machine to ensure it is properly mounted with the bolts properly oriented, the tension right and the screens properly aligned to the frame.
•    Inspecting all parts for tears and rips or wear and tear.
•    Replacing all worn parts bolts and deck and crown rubbers immediately for continued efficiency.
•    Do not walk on screens or allow staff to step on them. They can be damaged.
•    Avoid dropping tools on the screens.
•    Wash the screens thoroughly at the end of work every day to clean off mud and sticky substances.
•    Inspect the shaker screens at reasonable intervals for tears and holes. This will curb against letting mud accumulate and begin to weigh heavy against the equipment leaving it prone to heavy build-up of solids returned from the active mud tank.New
•    Inspecting and controlling mud weight will enhance screen life.

Poor handling of machines could reduce their life span and leading to machine failure. Inspection and maintenance of the drilling fluid shale shaker is a must for every end user of the shale shaker. It entails proper operation, installation, storage, monitoring and maintenance of the equipment.

Kosun have decanter centrifuge , shaker screen , vertical cutting dryer  , drilling waste management equioment system……

Welcome to contact us if you need.

Drilling Fluid Dryer Shaker Inspection and Maintenance

Drilling Fluids Dryer Shaker

Drilling fluids Dryer shaker maintenance of is straightforward, while there are a considerable measure of basic disappointments additionally, we have to comprehend the normal deficiencies of boring liquid shaker and how to manage.

The following are some common problems faced concerning the drilling fluids dryer shaker:
The vibration engine pivot turn out to be gradually, and there is a heading warming:
This demonstrates the typical upkeep of the shale shaker was not done well, and the bearing is shy of greasing up oil, if the oil is recently included the reason will be oil quality issues or get too full, second rate oil make the bearing square so oil quality is very essential. The Hi-G dryer suitable for both of WBM and OBM

Drilling Fluids Dryer Shaker
Drilling Fluids Dryer Shaker

The poor screening nature of penetrating drilling fluids dryer shaker:
This issues may for the most part brought on by the mis operation, it might be the screen work blockage, fine grain size and increment of water substance in the strainer material, the sifter material layer is too thick, sustaining imbalance, etc. May both sides of the screen is not tight, in the event that it is an offbeat shaft vibration may the belt is too free, a time of invert revolution can be taken after the mechanical preparing is finished keeping in mind the end goal to enhance the nature of screening.

Shaft break of shaker box:
In the event that the screen box has been because of absence of inflexibility, flat level did not recognize, will bring about the shaft crack, on the off chance that it still in operation will likewise make the material stream peculiarities. There likewise might be uncalled for operation, that is the imbalanced sustaining is additionally one reason.

The shale shaker can’t begin or plentiful is too little:
Ought to check whether the aggregation of oil on the electrical machine is excessively, if so we ought to expel stores on the vibrating screen.

Kosun has so many high quality products,for example: shaker screen , decanter centrifuge , vertical cutting dryer  ……. Welcome to contact us. We won’t let you down.